Tigerboard Specification
| Serial Number | 78325541 |
| Word Mark | TIGERBOARD |
| Status | 602 – Abandoned-Failure To Respond Or Late Response |
| Status Date | 2005-01-27 |
| Filing Date | 2003-11-10 |
| Mark Drawing | 4000 – Standard character mark Typeset |
| Law Office Assigned Location Code | M40 |
| Employee Name | FRYE, KIMBERLY |
Packaging List
The following items are available in the purchase of TigerBoard.
- One TigerBoard circuit board assembly.
- One micro USB cable.
SPI specification
- SPI master with programmable line rates up to 50Mbit/s.
- SPI slave up to 25Mbit/s.
- Full duplex read/write transfers.
- Configurable clock phase, clock polarity and chip select sense.
- Supports up to 17 master and slave devices.
- 3.3V interface.
I2C specification
- I2C master and slave interface.
- Programmable line rates up to 6.25Mbit/s.
- Configurable output – +3.3V with pull-up, +5V with pull-up or no pull-up.
- Clock stretching support to allow slow devices to wait-state the I2C bus.
- Back-to-back I2C commands supported using repeated start (for example Write-Read)
Analogue Interface
4 analogue inputs read with 8 bit resolution.
GPIO specification
- 48 general purpose IO pins
- 16 of these are advanced GPIO bits which can individually be configured as digital IO, PWM, continuous pulsed, single pulsed or interrupt input.
- Timing of pulse widths, duty cycles and pulse sense are fully programmable.
- 3.3V interface.
API
- High level commands for IIC, SPI and GPIO & Analogue I/F to allow simple development of applications.
- Extensive low level commands to allow flexible configuration of the interfaces.
Platform Support
Windows 2000/XP/Vista/Win7/Win8, Linux or Mac OS X.
C, C++, C#, VB support.
Power
The electronics of the TigerBoard is powered through the USB connection. No separate power supply cable is needed.
Mechanical Size
The TigerBoard circuit board assembly is 90mm x 60mm.
